Rocky Mountain Instrument Co.
1.303.664.5000
 

Tech Notes » Reflection & Refraction of Light Tutorial

In this section, we will discuss some of the basic behaviors of light when it travels from one medium to another. We will also discuss two special cases, Brewster's Angle and the Critical Angle, which hae valuable applications in optics.

Whenever an incident light traveling through one medium (ie: air with an index of refraction, denoted by "n", of 1) comes into contact with another medium with a high index of refraction (ie: glass with n=1.52), there is a reflected portion (bounces off the surface), and a refracted portion (transmits through the surface).

There are three important considerations whenever this happens:

1. What is the angle of refraction (θ2) relative to the incident (θ1) light? (It is generally known that the angle of reflection is equal to the angle of incidence).

2. What is the reflection loss of the incident light?

3. What is the effect of polarization on the reflected and refracted portions of the incident light?


reflectance-and-refraction-of-light

To Determine the answers to these questions, follow the steps below:

Step 1: Define the variables


Find the index of refraction for both lower and higher mediums. All optical materials have a unique index of refraction that is a key characteristic of the material (ie: ZnSe, n=2.4). However, it should be noted that the index of refraction for a given material is a function of wavelength and index increases as the wavelength gets shorter. In the special case of a vacuum or air, n=1.

θ1 = angle of incidence (or incoming angle) = angle of reflection
θ2 = angle of refraction.

 

Step 2: Use Snell's law to define the relationship between n1, n2, θ1 and θ2


Snell's Law: n1 sin θ1 = n2 sinθ2

 

Step 3: Once you have all four variables, use Fresnel's laws to calculate the loss in intensity due to reflection:


Snell's Law: n1 sin θ1 = n2 sinθ2

a) Reflection loss for any angle of incidence:

reflection-loss

b) Reflection loss for normal (0 degree) incidence:

reflection-for-normal-incidence

For our air/glass interchange with normal incidence, reflection loss is about 4%.

 

 

Special Case 1: Brewster's Angle


For any given material, Brewster's Angle is the angle of incidence at which point the P-Polarization of the reflected portion, RP, is equal to 0. For our simple air/glass interchange, Brewster's Angle is 56° 39′. Brewster's angle has particular usefulness in optical applications where the P-Polarized signal (transmitting portion) must be optimized. Brewster's angle is often used in conjunction with polarizer coatings to minimize laser coupling loss and to maximize the signal strength of the desired light source.

To calculate the Brewster's Angle for a given material, use the following equation:

 brewsters-angle-equation
 

 

 

 

 

 

 

Special Case 2: Critical Angle (for Total Internal Reflection)


Whenever incident light travels from a high index medium to a low index medium (ie: glass to air), the critical angle is another useful tool for many optical applications including prisms. The critical angle is the point at which all of the incident light starts to totally reflect within the higher index medium. In other words, there is no transmission to n, for any angle beyond the critical angle (unlike Brewster's Angle, which exists only at one point

This phenomenon is very useful in 45° prisms because the critical angle for BK7 and UVFS is approximately 41 degrees. At this angle and all angles beyond this point, (including 45°) the incident light reflects totally within the prism.

To calculate the critical angle for any given material, use the following equation:

 critical-angle